115TR

115tr

 

DOUBLE REDUCTION,10:1 thru 40:1 ratios

(SINGLE REDUCTION, 5:1 ratio, dimensions in parentheses)
Right click on link to download CAD drawing:  115TRCAD.dxf 

MODEL 115TR05 115TR10 115TR15 115TR20 115TR25 115TR30 115TR35 115TR40
ACTUAL RATIOS 5.929 10.7 15.377 20.294 25.062 29.955 34.176 38.832
SHIPPING WEIGHT (LBS.) 99 110 110 110 110 110 110 110

 

QUICK RELEASE TAPERED BUSHINGS:

bushing The bushing kit contains a bushing, nut, key(s) and mounting screws.
The recommended driven shaft length is 6.88 inches and uses the recommended keyway length. 
When an application requires the minimum driven shaft length, the keyway must be keyed along the entire length.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it for bore sizes not shown.

 

Bushing
Kit No.*
Weight
(Lbs.)
Type Driven Shaft Dimensions (Inches)
Dia. Keyway
Width X Depth
Recommended Key-way Length Minimum Driven Shaft Length
115T115 1 1 1 15/16 1/2 x 1/4 5 5/8 4 7/8
115T112 4 2 1 3/4 3/8 x 3/16 5 4 7/8
115T111 4 2 1 11/16 3/8 x 3/16 5 4 7/8
115T110 4 2 1 5/8 3/8 x 3/16 5 4 7/8
115T108 5 2 1 1/2 3/8 x 3/16 5 4 7/8
115T107 5 2 1 7/16 3/8 x 3/16 5 4 7/8
115T106 6 2 1 3/8 5/16 x 5/32 5 1/2 5 1/4
115T105 6 2 1 5/16 5/16 x 5/32 5 1/2 5 1/4
115T104 6 2 1 1/4 1/4 x 1/8 6 3/4 6 3/4
115T103 6 2 1 3/16 1/4 x 1/8 6 3/4 6 3/4
115T102 7 2 1 1/8 1/4 x 1/8 6 3/4 6 3/4
115T101 7 2 1 1/16 1/4 x 1/8 6 3/4 6 3/4
115T100 7 2 1 1/4 x 1/8 6 3/4 6 3/4

NOTES, OPTIONS & ACCESSORIES

MOTOR MOUNTS (1MM - 45 LBS.)

Motor brackets are shown in the intermediate position.  The brackets can be raised or lowered 4 5/8 inches to the high or low position by moving to the next set of mounting holes.

115tl_mm

The motor brackets can be mounted on either the long (6 o'clock) or short (3 o'clock) sides of the housing.

V-BELT CENTER DISTANCES FOR INTERMEDIATE MOUNTING POSITION (INCHES)

MOTOR MOUNT
ORIENTATION
MOTOR FRAME SIZE
56/143T/145T 182T/184T 213T
MIN. MAX. MIN. MAX. MIN. MAX.
SINGLE REDUCTION 6:00 23.55 26.55 24.55 27.55 25.30 28.30
3:00 19.73 22.70 20.72 23.69 21.46 24.43
DOUBLE REDUCTION 6:00 23.66 26.65 24.66 27.64 25.40 28.39
3:00 15.87 18.83 16.85 19.81 17.59 20.56

FACE  MOUNTING

Face mounting holes are not drilled on standard units -- Contact factory if face mounting is desired.

TORQUE ARM

The preferred position for the torque arm is 90° to a line between the point of attachment of the torque arm to the drive and the low speed shaft. The torque arm must be in tension. Keep the torque plate in the position shown.

EXTERNAL  BACKSTOP  KIT

Backstop extensions are standard on double reduction drives and can be supplied on single reduction drives if specified when order is placed. See Engineering Information section for backstop torque capacity.
Kit no. BS115TR -     20:1 thru 40:1 ratios
Kit no. BS115TR-1 - 10:1 thru 15:1 ratio
Kit no. BS115TR-5 -   5:1 ratio