315TL

315tl

Right click on link to download CAD drawing:  315TLCAD.dxf 

SCREW CONVEYOR DRIVE

The TL screw conveyor drive consists of a component gear drive (which equals the TR gear drive plus the gear drive adaptor and minus the torque arm assembly), a drive shaft kit and a trough end adaptor kit.
To convert a TR to a TL, a TR/TL conversion kit, along with a drive shaft kit and tround end adaptor kit is required.
The TL drive shaft kit contains a removable shaft, locknut, lockwasher and key. TL drive shafts have a tapered output end to avoid binding.
The trough end adaptor kit contains the trough end adaptor and packing gland assembly.  Dorris trough ends are available.

MODEL 315TL05 315TL10 315TL15 315TL20 315TL25 315TL30 315TL35 315TL40
ACTUAL RATIOS 6.071 10.815 15.543 19.849 24.562 29.301 34.304 38.79

 

DRIVE SHAFT DIA FOR CONVEYOR DIAMETER 315 TL SCREW CONVEYOR DRIVE WITH REMOVABLE DRIVE SHAFT DIMENSIONS (INCHES)
DRIVE SHAFT KIT WEIGHT (LBS) TROUGH END ADAPTOR KIT A B
DORRIS CEMA
2 7/16 12, 14 K31508-2 7/16 67 KD624-2 7/16 KC924-2 7/16 2 3/4 21/32
3 12 THRU 20 K31508-3 73 KD624-3 KC924-3 2 7/8 25/32
3 7/16 18 THRU 24 K31508-3 7/16 83 KD624-3 7/16 KC924-3 7/16 3 7/8 29/32

TROUGH END ADAPTORS

trough_end_adaptors

All dimensions are typical.
All trough end adaptors can use either the standard or high performance packing gland assembly.
C69 adaptor uses 1-1/2 inch drive shaft; C924 adaptor uses 2 through 3-716 inch drive shaft.

MOTOR MOUNTS (3MM  -- 117 lbs.)

Motor brackets are shown in the intermediate position.  The brackets can be raised or lowered 5.50 inches to the high or low position by moving to the next set of mounting holes.

315tl_mm

The motor brackets can be mounted on either the long (6 o'clock) or short (3 o'clock) sides of the housing.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it for trough end clearances for the other motor mounting positions not shown.

V-BELT CENTER DISTANCES FOR INTERMEDIATE MOUNTING POSITION (INCHES)

MOTOR MOUNT ORIENTATION MOTOR FRAME SIZE
182T/184T 213T/215T 254T/256T 284T/286T 324T/326T 364T/365T
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
SINGLE REDUCTION 6:00 31.29 34.28 32.04 35.03 33.04 36.03 33.78 36.78 34.78 37.78 35.78 38.78
3:00 25.50 28.43 26.23 29.17 27.21 30.15 27.94 30.89 28.92 31.87 29.90 32.86
DOUBLE REDUCTION 6:00 31.49 34.46 32.23 35.21 33.22 36.20 33.97 36.95 34.96 37.94 35.95 38.94
3:00 19.65 22.54 20.37 23.27 21.33 24.24 22.06 24.97 23.02 25.94 24.00 26.92

 

Dorris Trough End Clearances *

MOTOR MOUNT ORIENTATION DORRIS TROUGH END CLEARANCES *
'U' FLANGE (TEF) & FLUSH END (FE) TROUGH ENDS FLARED (FL) TROUGH ENDS TUBULAR (TU) TROUGH ENDS
SINGLE REDUCTION 6:00 14 - 18 - 24 6 - 18 - 24 6 - 18 - 24
3:00 14 - 18 - 24 9 - 18 - 24 12 - 18 - 24
DOUBLE REDUCTION 6:00 14 - 18 - 24 6 - 18 - 24 6 - 18 - 24
3:00 14 - 18 - 24 9 - 18 - 24 12 - 18 - 24