115TL

115tl

Right click on link to download CAD drawing:  115TLCAD.dxf 

SCREW CONVEYOR DRIVE

The TL screw conveyor drive consists of a component gear drive (which equals the TR gear drive plus the gear drive adaptor and minus the torque arm assembly), a drive shaft kit and a trough end adaptor kit.
To convert a TR to a TL, a TR/TL conversion kit, along with a drive shaft kit and tround end adaptor kit is required.
The TL drive shaft kit contains a removable shaft, locknut, lockwasher and key. TL drive shafts have a tapered output end to avoid binding.
The trough end adaptor kit contains the trough end adaptor and packing gland assembly.  Dorris trough ends are available.

MODEL 115TL05 115TL10 115TL15 115TL20 115TL25 115TL30 115TL35 115TL40
ACTUAL RATIOS 5.929 10.7 15.377 20.294 25.062 29.955 34.176 38.832

DRIVE SHAFT DIA FOR CONVEYOR DIAMETER 115TL SCREW CONVEYOR DRIVE WITH REMOVABLE DRIVE SHAFT DIMENSIONS (INCHES)
DRIVE SHAFT KIT WEIGHT (LBS) TROUGH END ADAPTOR KIT A B
DORRIS CEMA
1 1/2 6, 9 K11508-1 1/2 14 KD624-1 1/2 KC69-1 1/2 2 1/8 17/32
2 9, 12 K11508-2 17 KD624-2 KC924-2 2 1/8 21/32
2 7/16 12,14 K11508-2 7/16 21 KD624-2 7/16 KC924-2 7/16 2 3/4 21/32
3 12 THRU 20 K11508-3 27 KD624-3 KC924-3 2 7/8 25/32

TROUGH END ADAPTORS

trough_end_adaptors

All dimensions are typical.
All trough end adaptors can use either the standard or high performance packing gland assembly.
C69 adaptor uses 1-1/2 inch drive shaft; C924 adaptor uses 2 through 3-716 inch drive shaft.

MOTOR MOUNTS (1MM - 45 LBS.)

Motor brackets are shown in the intermediate position.  The brackets can be raised or lowered 4 5/8 inches to the high or low position by moving to the next set of mounting holes.

115tl_mm

The motor brackets can be mounted on either the long (6 o'clock) or short (3 o'clock) sides of the housing.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it for trough end clearances for the other motor mounting positions not shown.

V-BELT CENTER DISTANCES FOR INTERMEDIATE MOUNTING POSITION (INCHES)

MOTOR MOUNT ORIENTATION MOTOR FRAME SIZE DORRIS TROUGH END CLEARANCES*
56/143/145T 182T/184T 213T 'U'FLANGE (TEF) & FLUSH END (FE) TROUGH ENDS FLARED (FL) TROUGH ENDS TUBULAR (TU) TROUGH ENDS
MIN MAX MIN MAX MIN MAX
SINGLE REDUCTION 6:00 23.55
26.55
24.55
27.55
25.30
28.30
9 - 16 - 20 X - 14 - 20 6 - 14 - 20
3:00 19.73
22.70
20.72
23.69
21.46
24.43
9 - 16 - 20 X - 14 - 20 6 - 14 - 20
DOUBLE REDUCTION 6:00 23.66
26.65
24.66
27.64
25.40
28.39
9 - 16 - 20 X - 14 - 20 6 - 14 - 20
3:00 15.87 18.83 16.85 19.81 17.59 20.56
9 - 16 - 20 X - 14 - 20 6 - 14 - 20