9300 Series

(Download 9300 Series *.pdf file)

DOUBLE & TRIPLE
REDUCTION BASE TYPE GEAR DRIVES

919395cat

Average Shipping Weight:  700 Lbs.
Right click on link to download CAD drawing:  BASETYPE.dxf

NOTE:  Bracketed numbers in table below refer to Notes section below table.

MODEL RATIO (2) REDUCTION (3) RATINGS (1) GEARBOX (5) INERTIA (LB-FT2)
OUTPUT (RPM) INPUT HORSEPOWER OUTPUT TORQUE (IN-LB) INPUT SHAFT (4) OVERHAULING LOAD CAPACITY (LBS) OUTPUT SHAFT (4) OVERHAULING LOAD CAPACITY (LBS)
93078 (6) 7.867 DOUBLE 222 300.0 (7) 85,000 2000 8,200 1.95
9316 (6) 16.400 TRIPLE 107 137.0 (7) 81,150 2000 8,200 1.10
9323 22.943 TRIPLE 76 100.0 (7) 82,950 2000 8,200 0.55
9327 26.638 TRIPLE 66 86.3 82,790 2000 8,200 0.45
9330 30.035 TRIPLE 58 77.6 83,990 2000 9,500 0.40
9333 32.910 TRIPLE 53 69.9 82,880 2000 9,500 0.39
9337 37.501 TRIPLE 47 68.0 91,900 2000 9,500 0.38
9340 40.238 TRIPLE 43 61.7 89,400 2100 11,000 0.37
9350 49.988 TRIPLE 35 50.2 90,300 2100 11,000 0.36
9359 58.787 TRIPLE 30 43.3 91,600 2100 11,000 0.35
9370 70.363 TRIPLE 25 36.9 93,500 2150 14,000 0.34
9380 80.351 TRIPLE 22 31.9 92,300 2150 14,000 0.32
93100 100.157 TRIPLE 17 25.4 91,600 2200 16,000 0.27


NOTES

  1. Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.

  2. Non-standard ratios available.  Consult Dorris Company if desired ratio is not shown.

  3. Double reduction high speed shaft dimensions shown in parentheses ( ).

  4. Overhung load is measured at the midpoint of the key for the input and output shafts respectively.

  5. Measured at the input shaft.

  6. If a backstop is required consult Dorris Company for backstop torque capacity as it is less than the output torque rating shown.

  7. Consult Dorris Company for thermal capacity in your application.