900 Series

(Download 900 Series *.pdf file)

SINGLE REDUCTION BASE TYPE GEAR DRIVES

900cat

Average Shipping Weight:  65 Lbs.
Right click on link to download CAD drawing:  BASETYPE.dxf

 

NOTE:  Bracketed numbers in table below refer to Notes section below table.

MODEL RATIO (2) RATINGS (1) GEARBOX (4) INERTIA (LB-FT 2) DIA A. (INCHES)
OUTPUT (RPM) INPUT HORSEPOWER OUTPUT TORQUE (IN-LB) INPUT SHAFT (3) OVERHUNG LOAD CAPACITY (LBS) OUTPUT SHAFT (3) OVERHUNG LOAD CAPACITY (LBS)
9013 (5) 1.315 1331` 79.2 (6) 3750 75 500 0.13 1 1/4
9015 (5) 1.551 1128 70.9 (6) 3960 75 500 0.11 1 1/4
9019 (5) 1.907 918 59.7 (6) 4100 75 500 .10 1 1/4
9020 (5) 2.049 854 55.6 4100 75 500 0.09 1 1/4
9022 (5) 2.205 794 51.6 4100 75 500 0.08 1 1/4
9024 (5) 2.378 736 47.7 4090 75 500 0.08 1 1/4
9028 (5) 2.788 628 39.6 3980 150 1000 0.05 1 1/4
9030 3.032 577 36.0 3930 150 1000 0.04 1 1/4
9030 3.310 529 32.5 3870 150 1000 0.04 1 1/4
9036 3.630 482 29.3 3830 150 1000 0.04 1 1/4
9040 4.000 438 25.2 3630 200 1000 0.03 1 1/4
9042 4.208 416 23.6 3580 200 1000 0.03 1 1/4
9044 4.435 395 22.0 3510 200 1000 0.03 1 1/4
9047 4.682 374 20.2 3410 325 1000 0.03 1 1/4
9049 4.952 353 18.8 3360 325 1000 0.03 1 1/4
9052 5.250 333 17.6 3330 450 1000 0.02 1 1/8
9056 5.579 314 15.9 3200 450 1000 0.02 1 1/8
9059 5.944 294 14.5 3110 400 1000 0.02 1
9063 6.353 275 13.1 3000 400 1000 0.02 1
9068 6.813 257 12.0 2930 400 1000 0.02 1


NOTES

  1. Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.

  2. Non-standard ratios available.  Consult Dorris Company if desired ratio is not shown.

  3. Overhung load is measured at the midpoint of the key for the input and output shafts respectively.

  4. Measured at the input shaft.

  5. If a backstop is required consult Dorris Company for backstop torque capacity as it is less than the output torque rating shown.

  6. Consult Dorris Company for thermal capacity in your application.