Dorris Trough Ends
DORRIS TEF TROUGH ENDS
- Dorris TL gear drives with the D624 trough end adaptor will fit any Dorris trough end.
- When ordering Dorris trough ends, use the proper prefix and specify the conveyor diameter.
- For Dorris trough ends shown in this section, use the prefix TEF
- Example: TEF-12 trough end, for a 12 inch "U" conveyor.
- The gear drive mounting dimensions are typical for all Dorris through ends.
- Use the D624 Dorris trough end adaptor to mount TL gear drives to all Dorris trough ends.
- Bolt size and spacing conform ot industry standards. The bolt pattern and dimensions shown are symmetrical. Bolt holes are round, not slotted.
| PART NO. |
FOR CONV. DIA
|
DIMENSIONS IN INCHES |
WT. LBS
|
|
NO. HOLES
|
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
L |
M |
N |
P |
Q |
R |
| TEF-6 |
6 |
6 |
10 1/8 |
9 3/4 |
4 1/2 |
8 1/8 |
13/16 |
1 |
2 |
7/16 |
21/32 |
4 1/16 |
2 1/32 |
4 1/8 |
--- |
--- |
7/16 |
4 7/16 |
9 |
| TEF-9 |
9 |
8 |
14 |
13 1/2 |
6 1/8 |
9 3/8 |
2 1/16 |
1 1/2 |
3 |
9/16 |
13/16 |
3 3/4 |
2 9/16 |
4 1/8 |
--- |
4 1/8 |
7/16 |
6 1/4 |
17 |
| TEF-12 |
12 |
8 |
17 3/8 |
17 1/4 |
7 3/4 |
12 1/4 |
2 1/2 |
1 5/8 |
3 |
11/16 |
15/16 |
4 1/16 |
3 7/8 |
5 5/16 |
--- |
5 3/16 |
9/16 |
7 15/16 |
26 |
| TEF-14 |
14 |
8 |
20 1/8 |
19 1/4 |
9 1/4 |
13 1/2 |
2 7/8 |
1 5/8 |
3 |
11/16 |
1 3/32 |
5 15/16 |
3 |
5 5/8 |
--- |
5 15/16 |
9/16 |
8 15/16 |
33 |
| TEF-16 |
16 |
8 |
22 5/8 |
21 1/4 |
10 5/8 |
14 7/8 |
3 3/16 |
2 |
3 |
11/16 |
1 5/8 |
6 5/8 |
3 3/4 |
6 3/8 |
--- |
6 5/8 |
11/16 |
10 |
40 |
| TEF-18 |
18 |
10 |
25 1/2 |
24 1/4 |
12 1/8 |
16 |
4 1/8 |
2 |
3 |
11/16 |
3 9/16 |
5 7/8 |
2 15/16 |
5 15/16 |
5 15/16 |
--- |
11/16 |
11 |
51 |
| TEF-20 |
20 |
10 |
28 1/2 |
26 1/4 |
13 1/2 |
19 1/4 |
3 1/2 |
2 1/4 |
3 1/4 |
13/16 |
4 15/32 |
6 11/16 |
3 11/32 |
6 1/4 |
6 11/16 |
--- |
11/16 |
12 3/16 |
61 |
| TEF-24 |
24 |
12 |
34 5/8 |
30 1/4 |
16 1/2 |
20 |
5 1/8 |
2 1/2 |
3 1/2 |
13/16 |
31/32 |
6 5/8 |
3 5/16 |
6 1/8 |
6 5/8 |
6 5/8 |
11/16 |
14 1/4 |
84 |
ADDITIONAL DORRIS TROUGH ENDS AVAILABLE
Consult the Dorris Company for dimensions of type FE, FL or TU trough ends.
Bolt size and spacing of type FE, FL and TU trough ends conform to industry standards.
CEMA trough ends are also available. Consult
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
for dimensions.
TROUGH END ADAPTOR OPTIONS (Models 107 - 315)
Dorris TL screw conveyor drives can be used on all Dorris trough ends and also on all standard CEMA trough ends when the proper trough end adaptor is used.
The trough end adaptor is bolted to the gear drive adaptor
There is one gear drive adaptor for each TL screw conveyor drive model and all gear drive adaptors will accept any trough end adaptor.
If a different trough end is required, simply change the trough end adaptor.
|
