|
|
|
9900 Series (Download 9900 Series *.pdf file) DOUBLE & TRIPLE
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
REDUCTION (3) |
RATINGS (1) |
|
||||
|
|
|
OUTPUT TORQUE (IN-LB) |
INPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS) |
OUTPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS) |
||||
|
9915 (6) |
14.373 |
DOUBLE |
122.0 |
232.0 (7) |
119,850 |
1100 |
18,000 |
1.91 |
|
9925 |
24.523 |
DOUBLE |
71.0 |
157.0 (7) |
139,350 |
1100 |
20,000 |
1.09 |
|
9940 |
40.656 |
DOUBLE |
43.0 |
102.0 |
150,000 |
1200 |
20,000 |
0.55 |
|
9960 |
59.233 |
TRIPLE |
30.0 |
72.7 |
152,800 |
2500 |
20,000 |
0.65 |
|
9980 |
79.085 |
TRIPLE |
22.0 |
53.6 |
153,500 |
2500 |
20,000 |
0.77 |
|
99100 |
101.063 |
TRIPLE |
17.0 |
41.8 |
155,000 |
2500 |
20,000 |
0.56 |
|
99125 |
124.569 |
TRIPLE |
14.0 |
34.8 |
156,500 |
2500 |
20,000 |
0.55 |
|
99150 |
150.733 |
TRIPLE |
11.6 |
29.2 |
158,600 |
2500 |
20,000 |
0.54 |
|
99175 |
176.568 |
TRIPLE |
9.9 |
25.0 |
159,000 |
2500 |
20,000 |
0.45 |
|
99200 |
196.271 |
TRIPLE |
8.9 |
22.5 |
159,500 |
2500 |
20,000 |
0.45 |
|
99225 |
220.973 |
TRIPLE |
7.9 |
20.0 |
159,800 |
2500 |
20,000 |
0.35 |
|
99250 |
245.631 |
TRIPLE |
7.1 |
18.0 |
160,200 |
2500 |
20,000 |
0.35 |
NOTES
Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.
Non-standard ratios available. Consult Dorris Company if desired ratio is not shown.
Double reduction high speed shaft dimensions shown in parentheses ( ).
Overhung load is measured at the midpoint of the key for the input and output shafts respectively.
Measured at the input shaft.
If a backstop is required consult Dorris Company for backstop torque capacity as it is less than the output torque rating shown.
Consult Dorris Company for thermal capacity in your application.
|
Copyright © 2006 Dorris Company, Inc. All rights reserved. Contact the webmaster about this web site! |
