|
|
|
9500 Series (Download 9500 Series *.pdf file) DOUBLE & TRIPLE
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
REDUCTION (3) |
RATINGS (1) |
|
||||
|
|
|
OUTPUT TORQUE (IN-LB) |
INPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS) |
OUTPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS) |
||||
|
9510 (6) |
10.568 |
DOUBLE |
166 |
289.0 (7) |
110,000 |
1850 |
8,000 |
2.58 |
|
95262 (6) |
26.198 |
TRIPLE |
67 |
115.0 (7) |
109,000 |
1850 |
8,000 |
0.40 |
|
9530 |
30.035 |
TRIPLE |
58 |
98.1 |
106,100 |
1850 |
8,000 |
0.40 |
|
9532 |
32.100 |
TRIPLE |
54 |
95.0 |
110,000 |
1850 |
8,000 |
0.35 |
|
9537 |
37.501 |
TRIPLE |
47 |
83.7 |
113,000 |
1950 |
9,000 |
0.38 |
|
9540 |
40.238 |
TRIPLE |
43 |
78.3 |
113,500 |
1950 |
9,000 |
0.37 |
|
9550 |
49.988 |
TRIPLE |
35 |
63.3 |
114,000 |
2000 |
11,000 |
0.36 |
|
9559 |
58.787 |
TRIPLE |
30 |
54.3 |
115,000 |
2000 |
11,000 |
0.35 |
|
9570 |
70.363 |
TRIPLE |
25 |
45.6 |
115,500 |
2100 |
12,000 |
0.34 |
|
9580 |
80.351 |
TRIPLE |
22 |
40.1 |
116,000 |
2100 |
12,000 |
0.32 |
|
95100 |
100.157 |
TRIPLE |
17 |
32.4 |
117,000 |
2150 |
14,000 |
0.27 |
NOTES
Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.
Non-standard ratios available. Consult Dorris Company if desired ratio is not shown.
Double reduction high speed shaft dimensions shown in parentheses ( ).
Overhung load is measured at the midpoint of the key for the input and output shafts respectively.
Measured at the input shaft.
If a backstop is required consult Dorris Company for backstop torque capacity as it is less than the output torque rating shown.
Consult Dorris Company for thermal capacity in your application.
|
Copyright © 2006 Dorris Company, Inc. All rights reserved. Contact the webmaster about this web site! |
