|
1200 Series (Download
1200 Series *.pdf file)
DOUBLE REDUCTION BASE TYPE GEAR DRIVES
Average Shipping Weight: 59 Lbs.
Right click on link to download CAD drawing: BASETYPE.dxf
NOTE: Bracketed numbers in table below
refer to Notes section below table.
|
MODEL |
RATIO (2) |
RATINGS (1) |
GEARBOX (4) INERTIA (LB-FT 2) |
|
OUTPUT (RPM) |
INPUT HORSEPOWER |
OUTPUT TORQUE (IN-LB) |
INPUT SHAFT (3) OVERHUNG LOAD CAPACITY
(LBS) |
OUTPUT SHAFT (3) OVERHUNG LOAD
CAPACITY (LBS) |
|
1205 (5) |
4.952 |
353 |
15.1 |
2690 |
250 |
1250 |
0.03 |
|
1206 |
6.150 |
285 |
12.3 |
2720 |
250 |
1250 |
0.02 |
|
12065 |
6.634 |
264 |
11.5 |
2750 |
250 |
1250 |
0.02 |
|
1207 |
6.895 |
254 |
11.1 |
2750 |
250 |
1250 |
0.02 |
|
12075 |
7.462 |
234 |
10.2 |
2750 |
250 |
1250 |
0.01 |
|
1208 |
8.100 |
216 |
9.5 |
2770 |
250 |
1250 |
0.01 |
|
1209 |
9.212 |
190 |
8.3 |
2770 |
250 |
1250 |
0.01 |
|
1210 |
10.087 |
173 |
7.7 |
2780 |
250 |
1250 |
0.01 |
|
1211 |
11.097 |
158 |
7.0 |
2800 |
250 |
1250 |
0.01 |
|
1212 |
11.662 |
150 |
6.7 |
2800 |
250 |
1250 |
0.01 |
|
1214 |
13.667 |
128 |
5.7 |
2820 |
250 |
1250 |
0.01 |
|
1215 |
15.186 |
115 |
4.8 |
2620 |
250 |
1250 |
0.01 |
|
12174 |
17.379 |
101 |
4.5 |
2800 |
250 |
1250 |
0.01 |
|
1218 |
17.796 |
98 |
4.1 |
2640 |
250 |
1250 |
0.01 |
|
1220 |
19.413 |
90 |
3.5 |
2420 |
250 |
1250 |
0.01 |
|
1222 |
22.750 |
77 |
3.0 |
2440 |
250 |
1250 |
0.01 |
|
1224 |
24.074 |
73 |
2.8 |
2450 |
250 |
1250 |
0.01 |
|
1229 |
28.929 |
60 |
2.4 |
2460 |
250 |
1250 |
0.01 |
|
1236 |
35.859 |
49 |
1.7 |
2250 |
250 |
1250 |
0.01 |
NOTES
-
Horsepower, torque, output speed and overhung
load capacities based on 1750 rpm input speed and 1.00 Service Factor.
-
Non-standard ratios available. Consult
Dorris Company if desired ratio is not shown.
-
Overhung load is measured at the midpoint of
the key for the input and output shafts respectively.
-
Measured at the input shaft.
-
If a backstop is required consult Dorris
Company for backstop torque capacity as it is less than the output torque
rating shown.
| 
